Support
Answers to the common questions. Still stuck? Contact us.
What do I get on the free plan?
The full designer, 3D, cut list and nesting preview — plus a 14-day full-access trial (no card) and, after that, one free DXF export of the sheets you choose. Unlimited DXF exports are on the $20/mo plan.
What CAM does the DXF work with?
Vectric and any CAM that imports DXF. Parts are on named layers (CUTOUT, POCKET, UNDERMOUNT, DRILL_5MM, BORE_35MM…) and dados are overcut past open edges so pockets clear the part edge.
Is G-code available?
Not yet — direct G-code for Mach4 & Avid is coming soon. It’ll be tool-grouped (mill → drill → bore → profile), with the bit, feed, RPM and crossover for each operation set in the tool library. In the meantime the labelled DXF drives Vectric and other CAM.
Can I nest a whole job at once?
Yes — the Nesting tab groups every part across the rooms and materials you pick, packs each material on its own sheet, and gives you a labelled DXF per material (G-code coming soon).
How do I cancel?
From Account → Manage billing (Stripe portal). You keep export access until the end of the paid period.